Citizen Systems CBM-270 Benutzerhandbuch

CBM-270 User’s Manual

1. POWER lamp (Green)

Illuminated if the power is turned on.

2. ERROR lamp (Red), PAPER lamp (Red)

Indicates an error by illuminating or blinking the lamps.

Display

Error

ERROR Lamp

PAPER Lamp

Reset

Memory check error

Quick blinking

OFF

Cannot be reset

Head-up

ON

OFF

Lower the head-up lever.

Head overheat

ON

OFF

Automatically reset by a
temperature drop

Paper near end

OFF

ON

Set a new paper roll after a print
stop.

Paper end

OFF

ON

Set a new paper roll.

Macro execution wait

Slow blinking

OFF

Press the FEED switch.

Label paper cut wait

OFF

Slow blinking

Press the FEED switch.

Label paper error

ON

ON

Set the label paper suitable for the
specifications.

Head-up

----- Occurs when the head-up lever is raised.  The printer cannot feed the paper or print.

The parallel interface outputs BUSY and FAULT, and serial interface DTR,

respectively.

Head overheat

----- If the temperature of the printing head rises (About 60

°

C or more), in order to

protect it against overheating, a printing head temperature sensor will be activated to

stop printing.  The parallel interface outputs BUSY and FAULT, and serial interface

DTR, respectively.  If the temperature drops (About 55

°

C), printing will be

automatically resumed.

Paper near end

----- If the diameter of the paper roll decreases, the paper near end sensor will react to

inform you that the paper roll is running out.  See "4.8 Paper Near End Function".

Paper end

----- If the paper roll runs out, the paper sensor near the printing head will react to stop

printing.  See "4.7 Paper End Function".

Label paper error

----- Occurs if you set the thermal paper or non-specified label paper, when the label

paper has been selected.  The parallel interface outputs BUSY and FAULT, and

serial interface DTR, respectively.

3. FEED switch

See "4.6 FEED Switch Function."

(1) Types of paper

The red and black two-color thermal paper changes its colors by controlling the energy applied to the

thermal head.  It is largely divided into two types, depending on the color development order.  Select