Citizen Systems PROdot 350 Benutzerhandbuch
- 24 -
Passbook1 Mode - Automatic Passbook Length Detection
In off-line mode, press and hold the PARK/LOAD and DRAFT/LQ keys for
about 3 seconds to enter automatic passbook measurement mode.
about 3 seconds to enter automatic passbook measurement mode.
At this point, the ONLINE and POWER LEDs will blink.
Insert a passbook into the printer so that the passbook is automatically is
fed to the measure the length of the passbook. Press the ONLINE key
and the length will be stored in the printers memory. Its length will be valid
until another passbook is measured.
fed to the measure the length of the passbook. Press the ONLINE key
and the length will be stored in the printers memory. Its length will be valid
until another passbook is measured.
Passbook2 Mode - Fixed passbook length
In Passbook2 mode, the length of the passbook is determined by the
menu setting called PB Length.
menu setting called PB Length.
Using a fixed length passbook setting will be quicker as the printer does
not have to check and determine the length of the passbook before print-
ing starts.
not have to check and determine the length of the passbook before print-
ing starts.
Calculation of PB Length for Passbook2 mode.
First determine the size of one leaf of the passbook, as shown in the
diagram. If this value is in millimetres, convert to inches by dividing by
25.4 and then multiply by 6 to give the number of lines on a page.
diagram. If this value is in millimetres, convert to inches by dividing by
25.4 and then multiply by 6 to give the number of lines on a page.