Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Citizen Systems
  4. CBM1000
  5. Benutzerhandbuch

Citizen Systems CBM1000 Benutzerhandbuch

Download
Seite von 133
— 17 —
ENGLISH
1
Turn off the power of the printer.
2
Open the printer cover.
3
Take off two screws and remove printer
cover.
4
Take off damper retention screws,
reposition damper (11 mm) in the direction
of the arrow, then secure it with the
original screws again.
5
Replace printer cover on printer.
6
Install the supplied partition into the
position as illustrated.
7
Change DIP switch setting for 58 mm roll
paper, by referring to “SETTING DIP
SWITCHES”.
3.6 Using 58 mm Wide Paper Rolls
CAUTION
• Do not change DIP switch setting from 58 mm
into 80 mm roll paper in the middle of printing.
1
Open the printer cover.
2
Wipe off stains, such as dust and the like, on the heating element of the head using a
cotton swab soaked in ethyl alcohol.
3.8 Cleaning the Print Head
1
Turn off the power of the printer.
2
Open the printer cover.
3
Remove the paper jam including any paper chips remaining. (Also take out the paper
roll from the holder.)
4
Close the printer cover.
5
Turn on the printer. The auto cutter mechanism is initialized and the alarm is cleared.
3.7 Removing Jammed Paper
CAUTION
• The print head becomes hot immediately after printing. Do not touch it with your hand. Do
not touch the heating element of the head with a bare hand or metal object either.
CAUTION
• The print head becomes hot immediately after printing. Do not touch it with your hand. Do
not touch the heating element of the head with a bare hand or metal object either.
Printer cover
Damper
Partition