Citizen Systems CBM920II Benutzerhandbuch

— 16 —

With the FEED switch pressed once, paper is fed by one line.
Paper is fed while it is continuously pressed.
To feed paper, do not pull it forcibly. Use the FEED switch.
During pressing the FEED switch, the data can not be received.
Printing does not start while the switch is pressed.  Pressing this switch during printing
does not feed paper.

Do not use a pointed object, such as a pen, to press the FEED switch.
Never apply excessive force to the FEED switch.

(1)

Open the ribbon cover. Be sure to turn off power before opening it.

(2)

In case the paper is out from front
cover, cut the paper or remove this
paper.

(3)

Confirming the correct direction of a
new ribbon cassette, insert ribbon
between the printing head and the
platen and press cassette down from
the knob side.

(4)

Turning the ribbon cassette knob in the
arrowed direction, remove slack.

(5)

On replacing a ribbon cassette, pull it out as holding the "PULL" part.

• Leaving the printer for a long time with a ribbon cassette loaded may cause smudged printing.

Continuous printing at low temperature may cause thin printing due to the characteristic of
ink.

• Do not print without ribbon cassette loaded.  Otherwise, print head may be damaged.
• Replace the ink ribbon before it is broken by overuse.  Do not refill the ink ribbon.
• When setting or removing the ribbon cassette, do not apply excessive force to the ribbon

cassette or printer.  Otherwise, printer malfunction may occur.

• Use the specified ink ribbon.

PULL

PAPER

FEED