Citizen Systems CBM920II Benutzerhandbuch

— 5 —

Do not handle the equipment in the following manners, because problems may result.
● Do not print when there is no recording paper or ink ribbon set in the printer.

Otherwise, print head may be damaged.

● Be careful not to drop foreign substances, such as clips, pins, and screws, into the

equipment.

● Do not spill any liquid or spray any chemical-containing liquid over the equipment.

● Do not stamp on, drop, hit, or give a strong shock to the equipment.

● Never use a pointed object, such as a pen, to operate the operation panel.

● Do not use Scotch tape to fasten paper together for continuous use.

● Never pull the set paper forcibly or pull the paper in the direction reverse to the

paper feed direction.

● Replace the ink ribbon before it is broken by overuse.  Do not refill the ink ribbon.

● Remove the ribbon cassette when the printer is left unused for a long time.

● Leaving the printer unused for a long time with a ribbon cassette loaded may cause

smudged printing.  Continuous printing at low temperature may cause thin printing
due to the characteristic of ink.

● Do not deliver the printer with a ribbon cassette and roll paper loaded.

To Prevent Injury and Spreading of Damage
● Do not touch the printing part of the print head.

● While the equipment power is on, do not touch the moving parts, such as a cutter

and gear, or electric parts inside the equipment.

● Please place neither hand nor the finger when you open and shut the panel.

● Be careful to avoid bodily injure or damaging other objects with an edge of sheet

metal.

● Should any error occur while operating the equipment, stop using it immediately,

disconnect the power plug from the plug socket, and then contact your CITIZEN
SYSTEMS dealer.

● In case of a failure, do not attempt to disassemble the printer.  Refer the repair service

to your nearest CITIZEN SYSTEMS dealer or service personnel.