Citizen Systems CD-S500A Betriebsanweisung

Preparing the Printer

1

. Make  sure  that  the  printer  power

switch is set to OFF.

2

. If your printer is an AC adapter type,

insert the AC adapter cable connector
with  its  flat  side  upwards  into  the
power connector on the rear surface
of the printer.

If your printer is a built-in AC adapter
type, insert the plug on the power
cord into the AC inlet on the back
surface of the printer.

AC adapter cable

Flat side of the cable is up.

AC adapter type

AC inlet 

Built-in AC adapter type

 Do  not  use  an  AC

adapter  other  than
the stipulated product
(Model 51AD).

 Always hold the connector when

inserting  or  removing  the  cable
connector of the AC adapter.

 Stretching the power cord by pulling

it will damage it, causing fire, electric
shocks, or a break in the conductor.

 When lightening is striking nearby,

remove the plug of the power cord
from the outlet. Lightening will cause
fire or electric shock.

 Do not place the power cord near a

heating device. The cover of the power
cord will melt, causing fire or electric
shock.

 When the printer will not be used for

a long period, be sure to remove the
plug of the power cord from the outlet
to guarantee safety.

 Isolate the AC power source from

other devices that generate noise.