Xerox 701P47301 Benutzerhandbuch

–

Configuring the channel connection allows you to identify 
the unit address and channel speed assigned to the print 
server to send data to the IPS Manager from the host 
computer.

NOTE: Channel modes are dictated by the host, host channel 
extender speeds, and other properties of the bus and tag network.  
See your systems programmer to determine the appropriate 
channel speed.

•

Offset Page After Printer Fault Clearance offsets one sheet in 
the stack when printer fault occurs that requires clearing paper 
from the paper path.  The offset allows the operator to know 
when the output was interrupted and to more easily check to 
ensure job integrity after a printer fault.

•

Use Gray For Color controls color simulation on monochrome 
printers by using grayscales.  If the option is disabled, any 
IPDS objects calling for color will print as solid black.  When 
the option is enabled, IPDS objects calling for color will print 
with a grayscale to simulate the color.  This option is not 
available on highlight color or full color printers.

•

Shared Memory Space: The Shared Memory Space setting 
indicates the size of the shared memory segment that will be 
used by internal Xerox FreeFlow® Print Server IPDS 
components.

Shared memory space ranges from 16-1024 MB. The default 
value is 128 MB for monochrome printing systems, and 512 
MB for color printing systems.

•

Job timeout: Job timeout is selectable from 1-60 seconds, with 
the default of 10 seconds.

•

Printer Model: The IPS manager System Configuration dialog 
enables you to choose between several IBM Group 3 printer 
models. The available printer models are:

–

3812

–

3825

–

3827

–

3935

Any four-digit value may be entered in the text box; however, 
Xerox FreeFlow® Print Server IPDS will only function in 
accord with IPDS Group 3 printer protocols, regardless of the 
stated printer model number. This printer model selection is 
used to allow the system programmer or administrator at the 
host to identify the system to the host as if it were a particular 
IBM printer.

•

Legacy Mode: When legacy mode is disabled, Xerox 
FreeFlow® Print Server IPDS informs the host at startup that it 
supports container objects in home state (i.e. between jobs), 
even though the print server does not process the contents of 
the object containers. Certain hosts, including the RS 6000