Xerox 7000 Benutzerhandbuch
DocuColor 8000/7000 Operator Manual
6-24
6. Maintenance
5. Remove the cap from the bottle of Fuser Oil and replace it with
the Filler Spout Cap. This cap was provided to you when your
digital press was installed. Contact your Xerox service
representative if you cannot locate the Filler Spout Cap and
need another one.
6. Carefully insert the Filler Spout into the opened Fuser Oil
Reservoir and squeeze the bottle until the oil reaches the
maximum fill level tab visible inside the Reservoir.
7. Remove the Filler Cap from the bottle and place it on a cloth or
paper towel to drain. Return the original cap to the bottle of
Fuser Oil.
8. Close the Reservoir Cap, ensuring that it snaps into place.
9. Close the Right Front Door of the digital press.
9. Close the Right Front Door of the digital press.