Xerox 7000 Benutzerhandbuch

DocuColor 8000/7000 Operator Manual

2-2

2. Paper and paper trays

Many factors affect the performance of paper, including room 

temperature, humidity, paper quality, dust, and the size of the 

image area. If jams or paper curl problems occur, remove the 

paper from the paper tray, turn it over, place it back in the paper 

tray, and resume printing. If the problem is rectified, continue to 

load your paper in the same manner.
If the problem is not rectified, load a new ream of paper and try the 

process again. If the problem persists, your System Administrator 

may go into the Tools Mode and try the different decurler 

settings. If, after trying all the previous suggestions, the problem 

still persists, call your Xerox representative.
For reliable digital press operation and good print quality, Xerox 

recommends the following:

•

On a flat surface. Do not store paper directly on the floor, since 

this increases the possibility of moisture absorption. Paper 

should be stored on pallets, shelves, or in cabinets in an area 

protected from extremes of temperature and humidity.

•

In a low dust area.

•

In a low humidity area. Humidity is one of the most important 

steps to promote proper paper characteristics. Optimum paper 

storage conditions include a relative humidity of 35-55%. An 

increase in humidity may cause paper to develop wavy edges. 

This occurs because the edges absorb moisture while the rest 

of the ream remains unaffected. Wavy edges causes jams and 

misfeeds.

•

In an air-tight, moisture-proof container.