Xerox 721P85530 Benutzerhandbuch
PRINT FORMAT COMMANDS
XEROX DOCUPRINT 180 LPS PDL REFERENCE
6-21
LINE=(11,20),POS=1,FONT=3,POS=40,FONT=1,POS=80
,FONT=2,
LINE=(31,50),POS=1,FONT=2,POS=40,FONT=3,POS=80
,FONT=1;
,FONT=2,
LINE=(31,50),POS=1,FONT=2,POS=40,FONT=3,POS=80
,FONT=1;
•
Form and variable data
Under certain circumstances, a form and its associated variable
data do not align properly, even though it appears that both use
the same line spacing. Variable data has a line-spacing value
that is computed as dots per line, and rounding is done on that
value. In FDL, the rounding takes place only when it is needed
to resolve to a dot address and, therefore, might involve more
than one line at a time. Refer to the “Rounding measurements”
section in the
data do not align properly, even though it appears that both use
the same line spacing. Variable data has a line-spacing value
that is computed as dots per line, and rounding is done on that
value. In FDL, the rounding takes place only when it is needed
to resolve to a dot address and, therefore, might involve more
than one line at a time. Refer to the “Rounding measurements”
section in the
DocuPrint 180 LPS Forms Creation Guide
for
further information.
•
CME string constant
Whether a font switch is applied to a CME string constant
depends upon the order in which FONT and CONSTANT are
specified in the CME. If FONT is specified before CONSTANT,
the font switch applies to the string constant. If FONT is
specified after CONSTANT, the font switch occurs at the line
position immediately after the string constant.
depends upon the order in which FONT and CONSTANT are
specified in the CME. If FONT is specified before CONSTANT,
the font switch applies to the string constant. If FONT is
specified after CONSTANT, the font switch occurs at the line
position immediately after the string constant.
Where a CME string constant is printed on a line depends upon
where the POSITION and CONSTANT parameters are
specified in the CME. If POSITION is specified before
CONSTANT, the string constant is printed at the specified
position. If POSITION is specified after CONSTANT, the string
constant is printed at the current position (position 1 if no other
POSITION or CONSTANT parameter has been specified), and
a subsequent CONSTANT or FONT parameter will take effect
at the specified POSITION.
where the POSITION and CONSTANT parameters are
specified in the CME. If POSITION is specified before
CONSTANT, the string constant is printed at the specified
position. If POSITION is specified after CONSTANT, the string
constant is printed at the current position (position 1 if no other
POSITION or CONSTANT parameter has been specified), and
a subsequent CONSTANT or FONT parameter will take effect
at the specified POSITION.
•
RSX11host type
When the host type is RSX11, CMEs are often applied twice
per line because of the way the carriage return/line feed is
processed. When mixing font switches and string constants, the
string constants may appear twice and be overprinted with two
different fonts. The recommended approach for RSX11 host
types is to specify the string constant font before the string
constant itself, such as:
per line because of the way the carriage return/line feed is
processed. When mixing font switches and string constants, the
string constants may appear twice and be overprinted with two
different fonts. The recommended approach for RSX11 host
types is to specify the string constant font before the string
constant itself, such as:
FONT=1,CONSTANT=’string’,FONT=2;