Xerox t 180 Benutzerhandbuch
SYSGEN AND SYSGEN-RELATED PROCEDURES
XEROX DOCUPRINT 180 LPS SYSTEM GENERATION GUIDE
4-15
5. Key in Y and press <ENTER>.
This will be an auto sysgen
Reading files from tape/host is displayed.
Each file is read from tape and placed on the disk.
Creating file xxxxxx.yyy on drive d
xxxxxx is the system file name,
yyy is the system file type, and
d is the drive number that the file is
stored onto.
stored onto.
When sysgen completes, the following message displays:
* Tape rewinding *Sysgen process successful*
* Sysgen program off *
Enter Cmd [’C’ for Menu]>
* Sysgen program off *
Enter Cmd [’C’ for Menu]>
6. Key in B (boot) and press <ENTER>.
The OSS loads onto the system disk.
The messages window displays:
CPU Test Complete
Imaging Devices Present
Memory test in progress
Memory test complete
Loading Start-Up Task
XEROX DocuPrint 180
Laser Printing System
Version Revision
Disk ID = xxxx
The date window displays.
7. Enter the month (MM), day (DD), and year
(YY) in the appropriate boxes of the date
window (use the <TAB> key to advance
from box to box) and select the Apply/Close
header button.
window (use the <TAB> key to advance
from box to box) and select the Apply/Close
header button.
Enter the hour (HH), minute (MM), and
second (SS) in the appropriate boxes of the
time window (use the <TAB> key to advance
from box to box) and select the Apply/Close
header button.
second (SS) in the appropriate boxes of the
time window (use the <TAB> key to advance
from box to box) and select the Apply/Close
header button.
The time window displays.
Table 4-3.
Steps to perform an offline update sysgen using
the AUTO command (continued)
the AUTO command (continued)
Step
Action
System response