Xerox WC PE120 Series Benutzerhandbuch
Paper Handling
3.9
3
3
Squeeze the width guide and adjust it to the width of the
print material without bending it.
print material without bending it.
4
If you want the machine to stack the printed pages on the
rear output slot, open the rear door to use the rear output
rear output slot, open the rear door to use the rear output
slot.
C
AUTION
: Make sure to open the rear output slot when you print
on transparencies. If not, they may tear while exiting the machine.
5
After printing, fold away the paper support extension and
close the Bypass tray.
close the Bypass tray.
Tips on Using the Bypass Tray
• Load only one size of print material at a time in the Bypass
tray.
• To prevent paper jams, do not add paper when there is still
paper in the Bypass tray. This also applies to other types of
print materials.
• Print materials should be loaded face up with the top edge
going into the Bypass tray first and be placed in the center of
the tray.
• Always load only the print materials specified in the
Specifications on page E.6 to avoid paper jams and print
quality problems.
• Flatten any curl on postcards, envelopes, and labels before
loading them into the Bypass tray.
• When you print on 76 mm x 127 mm (3 x 5 in.) sized media
on the Bypass tray, open the rear door to use the rear output
slot.
• Make sure to open the rear door when you print on
transparencies. If not, they may tear while exiting the
machine.