Xerox 5252 Benutzerhandbuch
DocuColor 5252 Operator Manual
6-19
Accessories
6
A
cce
cce
ss
o
o
ries
Control Panel
Figure 6-13
1
2
3
4
5
6
7
8
9
Name
Function
1
Ready light
The Ready light blinks during initialization and is constant when the EHCS is in use
or in standby mode.
or in standby mode.
2
Sample set
button
button
Press to have the EHCS deliver the next collated set to the top tray.
3
Unload
button
button
Press once to lower the Stacker Tray and unlock the front door. If pressed while
running a job, all sheets in the paper path are delivered before the Stacker Tray
starts to lower.
running a job, all sheets in the paper path are delivered before the Stacker Tray
starts to lower.
4
Unload light
Illuminates when the Stacker Tray has reached the down position and the front door
can be opened.
can be opened.
5
Wait light
Blinks when the Stacker Tray is moving up or down.
6
Fault code
display
display
Refer to the fault code table later in this section.
7
Top tray jam
area
area
Blinks when there is a jam.
8
Bypass jam
area
area
Blinks when there is a jam.
9
Stacker tray
jam area
jam area
Blinks when there is a jam or the door is open.
Keypad
Used by the service representative for diagnostics (not shown). The keypad is
located on the front right of the control panel.
located on the front right of the control panel.