Xerox 5252 Benutzerhandbuch
DocuColor 5252 Operator Manual
6-31
Accessories
6
A
cce
cce
ss
o
o
ries
212 302
Top Cover open
1. Open Top Cover
2. Close the Top Cover
If the 212-302 Fault Code does not clear, ensure the Top
Cover is firmly closed.
2. Close the Top Cover
If the 212-302 Fault Code does not clear, ensure the Top
Cover is firmly closed.
212 540
Stacker tray full
Empty the Stacker Tray.
212 541
Stacker tray position
Press the Unload button. The Wait light blinks until the
Stacker Tray has reached the down position.
When the Stacker Tray has reached the down position, open
the front door.
Remove the Stacker Cart.
Remove all stacked paper.
Position the Stacker Cart securely into the EHCS.
Close the front door.
Stacker Tray has reached the down position.
When the Stacker Tray has reached the down position, open
the front door.
Remove the Stacker Cart.
Remove all stacked paper.
Position the Stacker Cart securely into the EHCS.
Close the front door.
212 542
No Stacker Cart
Open the front door.
Remove the Stacker Cart from the EHCS.
Position the Stacker Cart securely into the EHCS.
Close the front door
Remove the Stacker Cart from the EHCS.
Position the Stacker Cart securely into the EHCS.
Close the front door
212 544
Door open
Close the door
Ready Indicator
does not illuminate
does not illuminate
No power
• Check the power cord connected to the power source.
• Check that the GFI circuit breaker is not tripped (rear
• Check that the GFI circuit breaker is not tripped (rear
cover).
• Check that the main switch is on.
Poor Stacking
Mixed sizes of paper
Run separate jobs and empty stacker.
High paper curl
• Adjust digital press decurler.
• Flip paper in digital press paper tray(s).
• Rotate paper in the digital press paper tray(s).
• Flip paper in digital press paper tray(s).
• Rotate paper in the digital press paper tray(s).
Mechanical
obstruction
obstruction
• Check for obstruction in the stacker paper path.
• Ensure that all transports and baffles are properly seated.
• Ensure that the cart is properly seated.
• Ensure that all transports and baffles are properly seated.
• Ensure that the cart is properly seated.
Paper Jams:
Lower paper path
Deselect offset or restart job.
High paper curl
• Adjust digital press decurler.
• Flip paper over in the paper tray being used.
• Rotate the paper in the paper tray being used.
• Switch to heavier paper.
• Flip paper over in the paper tray being used.
• Rotate the paper in the paper tray being used.
• Switch to heavier paper.
Fault Code
Cause
Solution