Xerox 4500 ps eth Benutzerhandbuch
Problem Determination
Xerox 4500 PS ETH, Inst. & Operator's Guide
Xerox 4500 PS ETH, Inst. & Operator's Guide
153
•
Make a list of all the symptoms you have recorded for
subsequent problem determination.
Has an upgrade of microcode been performed?
Successfully
A successful microcode upgrade is indicated on the test printout with a
new Version number.
A successful microcode upgrade is indicated on the test printout with a
new Version number.
Unsuccessfully
Turn the printer off for a few seconds and back on. If problems persist,
revert to the microcode from the bootfile and repeat the upgrade process.
Refer to the appendix section “ Microcode Upgrading”.
Turn the printer off for a few seconds and back on. If problems persist,
revert to the microcode from the bootfile and repeat the upgrade process.
Refer to the appendix section “ Microcode Upgrading”.
If the probl em persists, refer to your general problem reporting proce dures
or contact your point of purchase.
or contact your point of purchase.
19.2.3 When printing
When operating via Win/OS2, you must make sure that the PrintServer is
connected.
connected.
NetWare:
If you are printing via Novell NetWare you must check that the settings for
the PSERVER (EPS) and the NPRINTER (ENP) are made correctly.
the PSERVER (EPS) and the NPRINTER (ENP) are made correctly.
Make a settings printout to check whether you have configured correctly.
Below are examples of possible error situations and hints as how to
remedy the situations.
remedy the situations.
NOTE:
When printing you should check the connection to the PServer viewing
the NetWare menu “Active Connections”.
When printing you should check the connection to the PServer viewing
the NetWare menu “Active Connections”.