Xerox 840 Benutzerhandbuch
62
PhaserShare Networking Manual
7
TCP/IP Printer Configuration (All Platforms)
7.
To set the gateway address:
a.
Press the right arrow button until
Gateway Address
is displayed.
b.
Press
Menu
; the front panel displays the gateway address.
c.
Use the up arrow and right arrow buttons as described in Steps 5d
through 5f to set the gateway address.
through 5f to set the gateway address.
d.
When the gateway address is set, use
Set
and
Confirm
as described
in Steps 5g and 5h to enter the gateway address into the printer.
e.
Press
Exit (the far right button); the front panel displays:
8.
The printer calculates the broadcast address based on the IP address and
the network mask. However, the broadcast address can be viewed and set
using the following procedure:
the network mask. However, the broadcast address can be viewed and set
using the following procedure:
a.
Press the right arrow button until
Broadcast Address
is displayed.
b.
Press
Menu
; the front panel displays the broadcast address.
c.
Use the up arrow and right arrow buttons as described in Steps 5d
through 5f to set the broadcast address.
through 5f to set the broadcast address.
d.
When the broadcast address is set, use
Select
and
Confirm
as
described in Steps 5g and 5h to enter the broadcast address into the
printer.
printer.
e.
Press
Exit (the far right button); the front panel displays:
9.
Return the printer to normal operation:
a.
Press
Exit (the far right button) until
Network Settings
appears on
the top line of the display.
b.
Press
Exit again.
■
If you have changed any parameters that require a printer reset to take
effect, you will be prompted to reset the printer. If you press
effect, you will be prompted to reset the printer. If you press
Confirm
,
the printer resets. To return to normal operation without resetting the
printer, press
printer, press
Exit (the far right button);
Printer Menu
appears on
the top line of the display. Press
Exit again; the printer returns to
normal operation, but the changes you have made will not take effect
until the next time the printer is reset.
until the next time the printer is reset.
■
If you have not changed any parameters that require a printer reset,
press
press
Exit again; the front panel displays
Ready
.
TCP/IP
Gateway Address Menu
TCP/IP
Broadcast Address Menu