Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Xerox
  4. 4508
  5. Benutzerhandbuch

Xerox 4508 Benutzerhandbuch

Download
Seite von 150
R e m o t e   C o n t r o l   P a n e l   a n d   S t a t u s   M o n i t o r   M e s s a g e s
C h a p t e r 6 :   T r o u b l e s h o o t i n g   ❖   6-5
I/O ERROR
The printer’s parallel cable does not 
support bi-directional communication.
Check that the ports on your PC/host 
are functioning and are not labeled 
incorrectly.
The communication between the 
printer and PC/host is having problems.
Check the cable from your printer. It 
could be loose or damaged.
The printer is not connected properly.
Verify the connection from the printer 
to the PC/host.
If problem persists, contact your dealer 
or Xerox/Rank Xerox for technical 
support.
MEMORY FULL
The printer received excessive data from 
the computer to process and is out of 
available memory.
Add additional printer memory SIMM.
You may have tried to transfer too 
many soft fonts, or graphic image may 
be too complex.
Decrease page image complexity.
If problem persists, contact your dealer 
or Xerox/Rank Xerox for technical 
support.
OFF-LINE
The status of the printer is OFF-LINE.
Press the Front Panel key to place the 
printer in ON-LINE state.
If the printer does not go to ON-LINE 
state, unplug it from the wall outlet. 
Wait one minute, then reconnect.
If problem persists, contact your dealer 
or Xerox/Rank Xerox for technical 
support.
ON-LINE
Printer is ready to receive data via the 
parallel port.
No corrective action required.
Table 6.2
RCP and SM messages (continued)
Message
Condition/Problem
Corrective Action
Table 6.2 Page 2 of 4
4508-c06.frm  Page 5  Wednesday, May 22, 1996  7:48 AM