Citizen Systems CMP-10BT Benutzerhandbuch
— 21 —
4. OPERATION
4.1 Replacing the Paper Roll
Press Cover Open switch (1).
Open Paper Cover (2).
Place the new paper roll as shown on illustration and pull out enough
paper to reach the control panel of the printer (3).
Close the Paper Cover.
If data to be printed still exists, press the LF switch to resume printing.
Open Paper Cover (2).
Place the new paper roll as shown on illustration and pull out enough
paper to reach the control panel of the printer (3).
Close the Paper Cover.
If data to be printed still exists, press the LF switch to resume printing.
CAUTION!
Be sure to use specified thermal paper rolls!
Make sure that the paper is correctly placed.
If print paper is tilted in one direction or another and does not come out straight
from under the cover, open the cover and set the paper roll again.
Make sure that the paper is correctly placed.
If print paper is tilted in one direction or another and does not come out straight
from under the cover, open the cover and set the paper roll again.
WARNING
When the paper cover is open, use care not to touch the print head or manual
cutter. Burn or cutting hand may result.
cutter. Burn or cutting hand may result.
(3)
(1)
(2)