Citizen Systems CMP-10BT Benutzerhandbuch

— 29 —

Make sure the printer power is off. Press ON/OFF switch and keep
pressed for about 5 seconds until .LED is changed to red and leave the
switch. Then buzzer beeps and printer prints current setting and goes
to setup menu as follows.

Example

DISCOVERABILITY:       YES

PAIRING INFO SAVING:   YES

MEMORY SWITCHES:       00000000

BAUD RATE:             9600

POWER OFF TIME:        10 min

PRINT DENSITY:         100%

MAX IrDA SPEED 57600: NO

The setting can be done by choosing NO (ON/OFF switch) or YES
(LF switch) against coming up questions .

During the menu setting, if YES is chosen somewhere, following
question comes up at the end of setup menu

If you want to save the changed setting, choose YES here and if not,
choose NO.
If YES is not chosen, the new setting will not be effective.
Setup menu ends with Power off in any case.