Wasp Bar Code 330 Merkblatt

Remove the printer from the box and place it 
on a stable, flat surface. The box will contain: 

• 

Printer 

• 

Power cord and adapter 

• 

USB Cable 

• 

1 roll of labels 

• 

Installation CD with printable documentation 

 

a.  Plug the power cord into the power adapter 

and then to the bottom of the printer (see 
figure in Step 3).  

b.  Plug the wall plug into a grounded and surge 

protected outlet or power strip. 

 

a.  Plug the USB cable into the USB Port on the 

bottom of the printer: 

 
 

 

b.  Insert the power and USB cables into the 

cable channel and set the printer down on 
your work surface. 

c.  Plug the USB cable into an available USB 

port on your computer.  A message similar to 
the following will appear: 

 

 

 
The Found New Hardware Wizard will 
appear. 
 

a. 

Insert the Installation CD.  On the Found 
New Hardware Wizard screen, click No, Not 
This Time, then click Next: 
 

b. 

Select Install the Software Automatically, 
then click Next.  
 

The install wizard will automatically search 
for the Installation CD. 

c. 

You may receive a message similar to the 
one shown below: 
 

 

 
If you receive this message, click Continue 
Anyway to proceed with the installation. 
 
The software will install. 

d. 

When the installation is complete, click 
Finish: