Cino MP3200 Benutzerhandbuch
Command Descriptions
Programming Reference
VERSAJET MP3200
If [horizontal logical origin + printing area width] exceeds the printable area, the printing
area width is automatically set to [horizontal printable area – horizontal logical origin].
area width is automatically set to [horizontal printable area – horizontal logical origin].
If [vertical logical origin + printing area height] exceeds the printable area, the printing
area height is automatically set to [vertical printable area – vertical logical origin].
area height is automatically set to [vertical printable area – vertical logical origin].
The printing area and the logical origin set by this command are effective only in page
mode.
mode.
This command setting has no effect in standard mode. If this command is processed in
standard mode, the logical origin and the printing area are set, and they are enabled
when the printer selects page mode.
standard mode, the logical origin and the printing area are set, and they are enabled
when the printer selects page mode.
Horizontal logical origin and printing area width are calculated using the vertical motion
unit.
unit.
Vertical logical origin and printing area height are calculated using the horizontal motion
unit.
unit.
The printing area and the logical origin set by this command are effective only in page
mode.
mode.
Even if the horizontal or vertical motion unit is changed the printable area, the setting of
the printable area will not be changed.
the printable area will not be changed.
The settings of this command are effective until FF is executed, ESC @ is executed, the
printer is reset, or the power is turned off.
printer is reset, or the power is turned off.
68
Preliminary Rev. 02