Citizen Systems 500 Benutzerhandbuch

13

There are three settings on the paper feed
selector level on the rear-left of the printer:

1

Rear Tractor Mode:  Fanfold tractor pa-

per from the rear tractor feeder unit.

2

Friction Feed Mode: Cut sheet paper

from the top sheet guide

3

Bottom Tractor Mode:  Fanfold tractor

paper from the bottom tractor feeder unit.

Turn the power on and the  PAPER OUT indicator will flash indicating that no paper is installed
in the  printer.

Adjust the head gap lever for the thickness of paper that  you are
using, then set the paper feed selector to the rear tractor mode
position.

Then lift off the top cover at the rear of the printer to expose the
rear tractor guides

Unlock the tractors by pulling the tractor clamping le-
vers (1) forward.  Slide the tractors to accommodate
the width of paper being used (2).

Lift the tractor covers (3) to expose the sprocket holes
with the tractor pins

Align the paper on the sprocket holes then close the
tractor covers

Adjust the tractors to remove any slack on the paper
and then lock the tractor clamping levers once again.