Epson GP-C831 Benutzerhandbuch

❏ If the trailing edge of the paper is past the paper sensor after the printed document is torn off, the

❏ Do not pull the loaded paper out of the tractor unit. Doing so may cause paper jams or printer

❏ The last page of continuous paper that is printed may have low print quality.

❏ If the first line on your page appears too high or low, you can change its position using the Micro

❏ Make sure that the right and left edges of continuous paper are straight and not slack when you load

❏ Do not pull the paper while printing. Doing so may adversely affect the print quality.

!

You can use the tear-off function to advance your continuous paper to the printer’s tear-off position
after you finish printing.

❏ To tear off the printed sheet manually after printing, press the Tear Off button to advance the

perforation of the paper to the tear-off position.

❏ To enable the auto tear-off function, turn on the Auto Tearoff Setting from the printer driver. The

printer advances the perforation of the paper to the tear-off position automatically when a set time
has passed after printing. When the printer receives the print data, the printer feeds the paper
backward to the top-of-form position automatically. For more information, see “Setting the Auto
Tear-Off Function” on page 35.

If the paper perforation is not in the desired tear-off position, you can use the Micro Adjust function to
adjust the position of the perforation. For more information, see “Adjusting the tear-off position” on
page 23.

Follow these steps to use the auto tear-off function.

GP-C830/GP-M830/GP-C831/GP-M831/GP-C832/GP-M832     User’s Guide

Paper Handling     20