Genesis Advanced Technologies GENESIS 5.3 Benutzerhandbuch

Seite von 24
 
 
Genesis 5.3 Owners Manual Ver 2.2 
 
4
~ÄëçäìíÉ=ÑáÇÉäáíó
 
6’ to 8’
20% 
80% 
10’ to 12’ 
 
Power Connections 
There are two connections you will need to make to the G5. First, 
the power cord for the built-in amplifier will need to be plugged into a 
power socket. A 10-foot power cord is included with your speakers 
for this purpose. We do not recommend using an extension cord for 
the G5 due to the high power demands of the 500W amplifier. 
However, if you MUST use an extension cord, use an extremely 
heavy duty one. The amplifier can draw up to 10 amps 
instantaneously at 115v, hence make sure that the extension cord is 
adequately rated. 
Before you plug the power cord in, please make sure that the 
voltage selector is set to the proper voltage. Japan and North 
America will require the 115v setting. Most European countries and 
other Asian countries will require 230v. The fuse is a 5amp 250v 
slow blow irregardless of voltage used. 
There is an on/off switch for the power amplifier. This switch should 
always be left on. We recommend that you plug the G5 into an 
unswitched outlet, or a switched outlet that can always be left ON. 
Typical room placement: Place speakers about 20% of the 
way into the room and 10 to 12 feet from the listeners