Emulex NQGB-NT+ Benutzerhandbuch
2-2 Chapter 2
The default printer server name is very important and is always used when
installing the printer server for the first time. Once a successful installation
has been accomplished, the default printer server name can be changed.
installing the printer server for the first time. Once a successful installation
has been accomplished, the default printer server name can be changed.
Default Server Name: NJA _____ _____ _____ _____ _____ _____
NOTE: We suggest you use the default printer server name
when installing the printer server for the first time.
To determine the default printer name, enter the Emulex default printer server
name combined with the Emulex printer server port number. Port numbering
on the NETJet is as follows:
name combined with the Emulex printer server port number. Port numbering
on the NETJet is as follows:
• #1 - Console terminal port
For example, NJA01A06A_1 is the NETJet console terminal port.
Default Printer Name: NJA____ ____ ____ ____ ____ ____ _ ____
Installation
The printer server may be installed in Hewlett-Packard MIO compliant
printers and plotters. Procedures vary by printer model, but will be similar to
these basic installation instructions.
printers and plotters. Procedures vary by printer model, but will be similar to
these basic installation instructions.
CAUTION: Printer power must be OFF or permanent damage
could result to both the printer or plotter and the
printer server.
printer server.
1) Turn the AC power switch OFF on the printer.
2) Remove the AC power cord from the printer.
3) Remove any cables connected to the printer.
4) Expose the MIO slot.
Remove any interface board or faceplate from the MIO slot.
5) Remove the Emulex printer server from its anti-static bag.
6) Insert the Emulex printer server into the printer MIO slot.