Samsung ML-3560 Series Benutzerhandbuch

Using Print Materials

4.3

• To prevent paper jams, do not add paper when there is 

still paper in the Multi-Purpose Tray. This also applies to 
other types of print materials.

• Print materials should be loaded face up with the top 

edge going into the Multi-Purpose Tray first, and be 
placed on the center of the tray.

• Do not place objects on the Multi-Purpose Tray. Also avoid 

pressing down or applying excessive force on it. The 
Multi-Purpose Tray may fall apart from the printer.

Pull the Multi-Purpose Tray down towards you. 

Pull the extender to extend the Multi-Purpose Tray to hold 
longer paper.

If you are using paper, flex or fan the edge of the paper 
stack to separate the pages before loading.

For transparencies, hold them by the edges and avoid 
touching the print side. Oils from your fingers can cause 
print quality problems.

Load the print material on the center of the tray with the 
print side up.

If you want to print on previously printed paper from the 
Multi-Purpose Tray, the printed side should be facing down 
with an uncurled edge to the printer. If you experience 
problems with paper feeding, turn the paper around.

: Make sure that you have not loaded too much print 

material. The print material buckles if you load a stack that is 

too deep or if you push it in too far.

Squeeze the paper width guide and slide it to the edge of 
the print material without causing it to bend.