Samsung SCX-5935 Series Benutzerhandbuch

Copying_ 67

The machine prints one side of the original on the upper half of the paper 

and the other side on the lower half without reducing the size of the original. 

This feature is helpful for copying a small-sized item, such as a business 

card.

•

This copy feature is available only when you place originals on the 

scanner glass.

•

The size of the 2-sided originals should be smaller than A5, if not, 

some of it won’t be copied. 

1. Place the front side of an original facing down on the scanner glass 

where arrows indicate as shown, and close the scanner lid. 

2. Press Copy from the main screen.
3. Select the tray in Paper Supply.
4. Press the Advanced tab > ID Copy.
5. Press Start on the control panel.

Then the machine starts scanning the front side. 

6. Turn the original over and  place it on the scanner glass, where arrows 

indicate as shown then, close the scanner lid.

7. Press Start on the control panel to begin copying.

•

If the original is larger than the printable area, some portions may 

not be printed.

•

If this option is grayed out, select the Duplex option to 1 -> 1 

Sided, the Output option to Collated.

1

2

1

2

3

4

The machine reduces the size of the original images and prints 2 or 4 pages 

onto one sheet of paper.
2 or 4-up copying is available only when you load originals into the 

document feeder.

1. Place the originals face up in the document feeder. (See "Loading 

2. Press Copy from the main screen.
3. Select the tray in Paper Supply.
4. Press the Advanced tab > N-Up.
5. Select Off, 2Up, or 4Up.

•

Off :  Copies an original onto one sheet of paper.

•

2Up :  Copies two separate originals onto one page.

•

4Up :  Copies four separate originals onto one page.

6. Press Start on the control panel.

You cannot adjust the copy size using the Reduce/Enlarge for the 

N-Up feature. 

Your original will be divided into 9 portions. You can paste the printed pages 

together to make one poster-sized document.
This copy feature is available only when you place originals on the scanner 

glass. 

1. Place a single original face down on the scanner glass and close the 

scanner lid. (See "Loading originals" on page 44.)

2. Press Copy from the main screen.
3. Select the tray in Paper Supply.
4. Press the Advanced tab > Poster Copy.

This feature is available only when the options in the Basic tab are 

selected as below; 
•

Duplex to 1 -> 1 Sided

•

Reduce/Enlarge to Original (100%)

•

Paper Supply to Tray

5. Press On to activate this feature. 
6. Press OK.
7. Press Start on the control panel to begin copying.

Your original is divided into 9 portions. Each portion is scanned 

and printed one by one in the following order:

The machine prints multiple original images on a single page. The number 

of images is automatically determined by the original image and the paper 

size.
This copy feature is available only when you place originals on the scanner 

glass.

1. Place a single original face down on the scanner glass and close the 

scanner lid. (See "Loading originals" on page 44.)

2. Press Copy from the main screen.