Primera Technology 032910-511262 Benutzerhandbuch

4.  The Recorder Trays then automatically shut.  As soon as

each drive tray closes the burn process will begin for that

drive.  With two drives, each drive burns independently of

the other.  If a disc does not record properly (meaning that

all or part of that disc is not recordable), the Robotic Disc

Transporter picks it out of the 

Recorder Tray

 and sends it

to the 

Reject Area

.

5.  The Recorders are now writing to the discs. If you were to

fully record a CD with data, audio, video or music (650

MB), recording time is about 3 ½ minutes each. A full DVD

records in about 7-15 minutes depending on the speed of

the media to which you are recording.  Most jobs don't fill

the entire disc, so recording time is usually less than this.

After recording, the Recorder Tray opens automatically.

The Robotic Disc Transporter will lift the disc out of the

Recorder Tray.  The Printer Tray will open. The Robotic

Disc Transporter will lower the disc into the Printer Tray,

and the Printer Tray will then automatically close. 

6.  The Robotic Disc Transporter will load the open Recorder

Drives with blank discs from the Input Bin to start record-

ing the next round. 

7.  Once the second round disc is loaded in the Recorder Tray,

printing will start with the recorded disc from the previous

round. This simultaneous printing and recording greatly

increases the throughput of your Publisher.

511262.qxd  10/15/2009  10:34 AM  Page 8