Printronix LQH-HWTM Benutzerhandbuch
Ignore Sequence
71
Ignore Sequence
Purpose
Enables the IGP to ignore all characters after the Ignore
Sequence On (IGON) command is entered. All characters are
ignored until the Ignore Sequence Off (IGOFF) command is
entered.
Sequence On (IGON) command is entered. All characters are
ignored until the Ignore Sequence Off (IGOFF) command is
entered.
Mode
NORMAL, CREATE, or EXECUTE
Format
(cc)IGON or (cc)IGOFF
(cc)
The Special Function Control Code.
IGON
Ignore Sequence On command; enter IGON.
IGOFF
Exits Ignore Sequence; enter IGOFF.
Comments IGON and IGOFF can also be used anywhere in the data stream.
Line Spacing
Purpose
Defines the lines per inch (lpi) printing format.
Mode
NORMAL, EXECUTE
Format
(cc)LPI;
n
(cc)
The Special Function Control Code.
LPI
The Vertical Line Spacing command; enter LPI.
n
Selects the line spacing in lpi; enter 6, 8, 9, or 10.
Comments Standard line spacing is 6 lpi. After a Vertical Line Spacing
command is entered, all subsequent alphanumerics print at the
specified lpi until another Vertical Line Spacing command, a
Normal Mode command, or a Reset command is entered.
specified lpi until another Vertical Line Spacing command, a
Normal Mode command, or a Reset command is entered.
Example
The following command selects 9 lpi printing format until another
Line Spacing command, a Normal Mode command, or a Reset
command is entered.
Line Spacing command, a Normal Mode command, or a Reset
command is entered.
~LPI;9
Note
A line terminator is not required in the Ignore Sequence.