Primera Technology 090709-510963-(01) Benutzerhandbuch

Once the print has finished, you will see the following 
dialog box:

Look at the finished alignment disc and pick the numbers that
come closest to lining up with one another.  For instance, on
the disc shown in this manual, the vertical alignment is 2 and
the horizontal alignment is 0. Enter this in the alignment dialog
box.

If you choose not to print the test print, you will simply see the
alignment dialog box and can enter values to move the image.
The unit of measure is roughly 0.1mm. Making the Horizontal
Calibration number smaller or more negative will move the
image slightly to the left.  Making the Horizontal Calibration a
larger value, or more positive will move the image to the right.
If the Vertical Calibration number is made smaller, or more
negative the image will move slightly up.  If the Vertical
Calibration is set to a larger value, or more positive value, the
image will move down on the disc.

Calibrate Last Disc

Use this calibration if you frequently receive false messages
that two discs were picked.  When you press this button you
will be prompted to place one disc in the input bin.  The
Publisher will then touch each disc with the robotic arm to set
the correct measurement for the last disc in the bin.