Printronix PSA3 Benutzerhandbuch
46
Chapter
3
Configuring The KSSM Emulation With Control Codes
Line Feed
ASCII Code LF
Hex Code
0A
Dec Code 10
Purpose
Advances the vertical print position one line (in the currently set
line spacing).
line spacing).
The LF command cancels one-line double-width printing
selected with the SO, ESC SO, or FS SO commands.
selected with the SO, ESC SO, or FS SO commands.
Comment
The user can define LF = LF or LF = CR + LF from the front
panel.
panel.
If LF = CR + LF, the printer moves the horizontal print position
to the left-margin position.
to the left-margin position.
If the LF command moves the print position below the bottom
margin on continuous paper, the printer advances to the top-of-
form position on the next page.
margin on continuous paper, the printer advances to the top-of-
form position on the next page.