Printronix PSA3 Benutzerhandbuch
62
Chapter
3
Configuring The KSSM Emulation With Control Codes
Select DBCS Mode
ASCII Code FS &
Hex Code
1C 26
Dec Code 28
38
Purpose
Sets the printer in DBCS mode.
Comment
In DBCS mode, all the data received by the printer with the
MSB set will be paired with the next character to be a DBCS
(double byte character system) character. Otherwise, the
character will be treated individually as SBCS (single byte
character system) character and printed accordingly.
MSB set will be paired with the next character to be a DBCS
(double byte character system) character. Otherwise, the
character will be treated individually as SBCS (single byte
character system) character and printed accordingly.
The DBCS mode should be set before processing Hangul
characters.
characters.
This command affects the front panel setting of “DBCS/ASCII
mode.”
mode.”
The default is DBCS mode.
Cancel DBCS Mode
ASCII Code FS .
Hex Code
1C 2E
Dec Code 28
46
Purpose
Cancels DBCS mode. The printer is set back to ASCII mode.
Comment
A few ESC commands only work in ASCII mode.
This command affects the front panel setting of “DBCS/ ASCII
MODE.”
MODE.”
The default is DBCS mode.
Select Hangul Myunjo/Gothic Style
ASCII Code FS k
n
Hex Code
1C 6B
n
Dec Code 28
107
n
Purpose
Selects Myunjo/Gothic style according to the following values:
n = 0 or 2 Set Myunjo style
n = 1 or 3 Set Gothic style
n = 1 or 3 Set Gothic style
Where:
0 <=
0 <=
n <= 3
Comment
The default is Myunjo style.