Printronix PSA3 Benutzerhandbuch
72
Chapter
3
Configuring The KSSM Emulation With Control Codes
Set Relative Horizontal Print Position
ASCII Code ESC \
n1 n2
Hex Code
1B 5C
n1 n2
Dec Code 27
92
n1 n2
Purpose
Moves the horizontal print position left or right from the current
position.
position.
For right movement: horizontal position =
n2 * 256 + n1.
For left movement: horizontal position = 65536 - (
n2*256 + n1).
Where:
0 <=
0 <=
n1 <= 127
0 <=
n2 <= 255
Comment
The printer ignores this command if the command would move
the print position outside the printing area.
the print position outside the printing area.
The default defined unit for this command is according to the
current density: 1/120 inch for Near LQ and 1/180 inch for LQ,
Normal, Hi-Speed, Super Hi-Speed, and Ultra Hi-Speed.
current density: 1/120 inch for Near LQ and 1/180 inch for LQ,
Normal, Hi-Speed, Super Hi-Speed, and Ultra Hi-Speed.
Set Right Margin
ASCII Code ESC Q
n
Hex Code
1B 51
n
Dec Code 27
81
n
Purpose
Sets the right margin to
n columns in the current character
pitch, as measured from the left-most printable column.
Where:
1 <=
1 <=
n <= 255
left margin < (current pitch) *
n < printable area width
Comment
In DBCS mode, the right margin will be set according to the
width of the DBCS character.
width of the DBCS character.
This command affects the front panel setting of “Right Margin.”
The default depends on the power-up configuration.