Primera Technology Disc Publisher Pro Benutzerhandbuch

4.  The Recorder Trays then automatically shut.  If a disc does

not record properly (meaning that all or part of that disc is
not recordable), the Robotic Disc Transporter picks it out of
the CD Tray and sends it to the Reject Area.

5.  The Recorders are now writing to the discs. If you were to

fully record a CD with data, audio, video or music (650
MB), recording time is about 3 ½ minutes each. A full DVD
records in about 7-15 minutes depending on the speed of
the media to which you are recording.  Most jobs don't fill
the entire disc, so recording time is usually less than this.
After recording, the bottom Recorder Tray opens automati-
cally. The Robotic Disc Transporter will lift the disc out of
the Recorder Tray. The Recorder Tray will close, and the
Printer Tray will open. The Robotic Disc Transporter will
lower the disc into the Printer Tray, and the Printer Tray
will then automatically close. The Robotic Disc Transporter
will now pick the second disc from the top Recorder Tray
and temporarily place in the Output Bin.

6.  If publishing more than two discs, the Robotic Disc

Transporter will load the Recording Drives with blank
discs from the Input Bin to start recording the next round.
It will then move the second recorded disc from the Output
Bin to the Input Bin so that the printed disc can be placed
in the Output Bin when finished.

7.  Once recording has started on the next round, printing will

start with the recorded disc from the previous round. This
simultaneous printing and recording greatly increases the
throughput of your Publisher.