Primera Technology ADL-MAX Benutzerhandbuch

D.

SYSTEM REQUIREMENTS

Please refer to the PC system requirements for Duplicator that

will be used with the unit. 

E.

OVERVIEW OF OPERATION

The following is a description of the complete process of

copying and printing a CD job on your Autoloader:
1. Up to 300 blank discs may be loaded at one time.  Each

Input/Output Bin will hold 100 discs.  The far left

Input/Output Bin is left empty to be the first to collect

finished output.  

2. The Autoloader has an integrated robotic arm that "picks"

one disc one at a time from an Input Bin.  

3. CD Recorder Trays open automatically and the Robotic

Arm places a disc into each of the recorders.

4. All CD Recorder Trays then automatically shut.
Through software control, you can perform a verification test

on each CD-R disc before recording.  If a disc does not pass

(meaning that all or part of that disc is not recordable), the

Robotic Arm picks it out of the CD Tray and sends it to the

Reject Area

, in the left bin of the Disc Publisher.

5. The CD-Rs are now recorded.  If you were to fill up each

CD with data, audio, video or music (650 MB), recording

time is about 3 ½ to 4 minutes each.  DVDs recording time

is from 7-15 minutes depending on the speed of your

media. Most jobs don't fill the entire disc, so recording time

is usually less than this.

6. After recording, the Trays open automatically. The Robotic

Arm will transport the first disc to the printer.  All others

will be transported to the Disc Publisher Output Bin

temporarily.

7. The Robotic Arm will now load the drives with blank 

CD-Rs from an Input Bin to start recording the next round.

510975.qxd  9/28/2006  9:39 AM  Page 5