Primera Technology BravoTM Benutzerhandbuch

• Print on disc before recording / Record on disc 

before printing
These options allow you to choose whether or not you

wish to record or print first on the discs. It is

recommended that you always record first to avoid

wasting ink on discs that fail verification. However,

when producing business card CD-Rs, it is required to

print first in order to make sure the card aligns

properly in the printer because it is not possible to

control the direction a card is facing when it leaves the

recorder.

• Number of discs

Select the number of discs you wild like to produce.

• Test Write / Write

This allows for either an actual write or a simulated

write to your media. 

• Write Speed

This defaults to the fastest write speed that the current

selected writer supports. The speed may be set lower if

failures occur.

• Open Next Session

Selecting this will leave the disc open for another

session to be written later. 

• Verify After Writing

Checking this will allow freshly written data discs to

be verified against the original to ensure that the copy

and the original are the same. This will increase the

time it takes to create a disc.

• Using BURN-Proof / JustLink

This setting allows 

Discribe 

to take advantage of drives

using BURN-Proof/JustLink type technologies. This

setting will cause your drive to monitor the transfer of

data and slow the recording speed if data is not

reaching the drive fast enough. This is helpful in

avoiding recording failures, but may slow recording

times.

5. Click Start to begin recording. The Bravo will

automatically print and record your discs!

510701a.qxd  3/13/03  11:09 AM  Page 26