Primera Technology BravoTM Benutzerhandbuch

The Publisher is designed to operate for extended periods of

time with very little attention.  In fact, no regular maintenance

is recommended other than cleaning the outside case.

A. CLEANING THE PUBLISHER

Use a clean, lint-free rag with a small amount of ammonia

window cleaner to clean the Publisher's outside case and trays.

This type of cleaner is very effective on inks that may

accumulate on the printer tray.  Stronger cleaning solutions are

NOT recommended because they may damage the paint and

plastic materials from which the parts are manufactured.
Always disconnect your Publisher’s power cords before

cleaning.  Resume operation only after the surfaces are

completely dry.

B. PERFORMING A ROBOTIC SELF-TEST

To ensure that everything is working properly, a Self-Test feature

is built in to your Publisher. In this mode, the Robotic Disc

Transporter will go through the motions of picking and placing

a disc to ensure proper working order. This test may be

performed without connecting the Publisher to the PC. Perform

the test by doing the following steps:
• Load some discs into the 

Input Bin

• Make sure the Publisher’s front cover is closed
• With the Publisher turned on, press the 

Cartridge Button

• While holding the Cartridge Button, press the 

Power Button         until the robotics start to move. 

• Release both buttons
• To stop the test, wait until the disc has moved to the 

Output

Bin 

and press the Power Button.

510701a.qxd  3/13/03  11:09 AM  Page 32