Primera Technology DP-XRn Benutzerhandbuch
8
Hardware and Software Setup
•
Using the key provided, open the front cover of the unit.
•
The Printer will automatically position the cartridge
carrier and Robotic Disc Transporter to the center position
carrier and Robotic Disc Transporter to the center position
allowing for easy access to the bins.
•
Load the right and left bins with CDs, DVDs, DVD-DL or a
combination. (Each bin can hold only one type of media)
Note the type of media that you are loading in each bin.
You can add this information to the description of the unit
using the Administrator Utility. If you are mixing media
types you must enable bin selection using the
Administrator Utility. See Section 4A of the users manual
for more information about the Administrator Utility.
combination. (Each bin can hold only one type of media)
Note the type of media that you are loading in each bin.
You can add this information to the description of the unit
using the Administrator Utility. If you are mixing media
types you must enable bin selection using the
Administrator Utility. See Section 4A of the users manual
for more information about the Administrator Utility.
Step 4: Connect the Ethernet Cable
Connect the unit to the 10/100 or Gigabit Ethernet port with the
provided ethernet cable. The XRn will appear on your network as
XRn-xxxxx where xxxxx is a number between 00001 and 99999.
provided ethernet cable. The XRn will appear on your network as
XRn-xxxxx where xxxxx is a number between 00001 and 99999.