Ricoh SP 3500N Benutzerhandbuch
4. Configuration
This chapter explains supported network connections and settings for the IP addresses.
Ethernet Configuration
If connecting the printer to a network using an Ethernet cable, set the necessary settings, depending on
the network environment, on the control panel.
Web Image Monitor can be used for the settings related to the IP address.
the network environment, on the control panel.
Web Image Monitor can be used for the settings related to the IP address.
• The following table shows the control panel settings and their default values. These items appear in
the [Network Setting] under [Host Interface] menu.
Setting Name
Value
Ethernet Speed
Auto Select
IPsec
Off
MAC Address
XX-XX-XX-XX-XX-XX *
1
IPv4 Config.
• DHCP: Active
• IP Address: XXX.XXX.XXX.XXX *
• IP Address: XXX.XXX.XXX.XXX *
1
• Subnet Mask: XXX. XXX. XXX. XXX *
1
• Gateway Address: XXX.XXX.XXX.XXX *
1
43