Primera Technology LX400 Benutzerhandbuch

Sensor Type

Sensor Type refers to the method the printer will use to detect

the print starting position for each label.  If you are using 

standard die-cut labels or Through-hole label material where 

a hole is punched through each label for alignment purposes

use the Through-hole/Die-Cut setting.  Use Reflective for

black stripe sensing label material where a pre-printed line on

the back of the label stock indicates the break between labels.

If you have continuous stock with no die-cut, reflective mark

or holes set the sensor type to Continuous Feed.  This will

turn off the stock sensor.

Output Mode

Do not present (use with Rewinder). The label stock does not

move after the last label is printed.  This means that part of the

last label printed is still in the printer.  This should be used

only if you have a label rewinder attached.
Present (Default). This setting will cause the printer to feed the

last label printed forward so that it and the previously printed

labels can be torn off using the tear bar.  This will occur only if

there are no other print jobs in queue.
Cut (using optional cutter). Use this setting only if you have

the label cutter attachment (Primera Part # 074263)

510984.qxd  11/21/2006  9:09 AM  Page 43