Primera Technology LX810 Benutzerhandbuch

A. CLEANING THE PRINTER

It may be necessary to clean the ink cartridge nozzles if the

your labels are printing with horizontal banding or if you 

suspect an ink cartridge nozzle has become slightly dried out

or clogged. Refer to the cleaning procedure explained within

the Clean/ Purge description of Section 2-D to clean the 

cartridge nozzles.
If any ink has gotten on to the printer casing itself, the case of

the printer can be cleaned with an ammonia based window

cleaner and a lint-free cloth.
Over time, ink overspray may gather at the base of the printer.

The printer is designed using a vacuum system to gather most

of this ink on a series of saturation pads.  Eventually, these

pads may need to be replaced.  Contact tech support to 

determine if pad replacement is necessary. An ink pad 

replacement kit is available. (Part Number 074220)

B. CLEANING THE INK CARTRIDGE

It may be necessary to clean the ink cartridge nozzles if you

notice reduced print quality, or if you suspect an cartridge 

nozzle has become slightly dried out or clogged.  If you are

having print quality problems, follow the steps below:
1.  Remove the print cartridge.
2.  Moisten a lint-free cloth with water.
3.  Hold the cloth against the

nozzles for three seconds.

This will “wick” some 

additional ink onto the

damp cloth.

4.  Wipe in one direction only.
5.  Repeat the process.

510943.qxd  11/27/2007  11:27 AM  Page 40