Primera Technology LX 810 Benutzerhandbuch

A. CLEANING THE PRINTER

It may be necessary to clean the ink cartridge nozzles if the your

labels are printing with horizontal banding or if you suspect an

ink cartridge nozzle has become slightly dried out or clogged.

Refer to the cleaning procedure explained within the Clean/

Purge description of Section 2-D to clean the cartridge nozzles.
If any ink has gotten on to the printer casing itself, the case of the

printer can be cleaned with an ammonia based window cleaner

and a lint-free cloth.
Over time, ink overspray may gather at the base of the printer.

The printer is designed using a vacuum system to gather most of

this ink on a series of saturation pads.  Eventually, these pads

may need to be replaced.  Contact tech support to determine if

pad replacement is necessary. An ink pad replacement kit is

available. (Part Number 074220)

B. BASIC TROUBLESHOOTING

Generally, when a malfunction or an abnormal condition occurs,

the "PAUSE " LED will keep blinking repeatedly and printing and

communication between the host PC and the 

printer will cease. 
After the problems have been solved, press PAUSE to clear the

error and continue printing.  Here is a general guide to some

common error conditions:

Missing gap

Printer ejects media 

•  Check Media Path

Refer to section 2-B  

or can not find the 

•  Check Position of 

for proper installation 

start of the label, 

sensor

of label stock

then times out with 

flashing "PAUSE" LED

Image printing  Label is not feeding

•  Check media path

Refer to section 2-B 

off center or off  straight, images 

•  Check throat guide

for proper installation

the edge of the  look misaligned

and roll guide

of label stock

label

510943.qxd  12/5/2005  1:03 PM  Page 39