Primera Technology LX800 Benutzerhandbuch

F.

APPLYING POWER

1.  Locate the power adapter supplied with your printer.
2.  Place one end

of the adapter

cord into the

power port on

the rear panel

of the printer.

3.  Plug the power

cord of the

adapter into an

available wall

outlet or surge

protecting

power strip.

Once the power cord is connected, the printer can be

switched on and off using the power switch.

G.

INSTALLING THE DRIVER AND SOFTWARE

The Color Label Printer is designed to be used with nearly 

any IBM-PC® or compatible running Windows 2000/XP or a

Macintosh running OS 10.2 or higher.  The printer is equipped

with a USB 1.0/2.0 port.  This port is the means through which

it receives data from your computer.  To connect the printer to

your computer, use the included shielded USB cable.  The soft-

ware installs as follows:

PC Installation

1. Insert the Installation CD into your computer.  In a few

moments the installer program should launch 

automatically.  If not, perform the following steps:
a. Double click My Computer Icon, then double click 

the icon of the appropriate CD drive containing the

software installer disc.

b. Double click INSTALL.exe then click the Quick Start

Install Button.

2. Follow the on screen instructions to install the software.

These steps are illustrated below:
a. Apply power

510910.qxd  9/26/2005  2:32 PM  Page 5