Ricoh SP 3510DN Benutzerhandbuch
3.
Adjust the side guides to the paper width.
CMC075
• After loading paper in the tray, specify the paper type and size using the control panel. Also,
specify the printer driver's paper setting accordingly before printing.
• For details about supported types of paper, see p.53 "Paper and Other Media".
• For details about the paper settings, see p.75 "Setting a paper size using the control panel" and p.
• For details about the paper settings, see p.75 "Setting a paper size using the control panel" and p.
Specifying standard size paper for the bypass tray
This describes how to load standard size paper into the bypass tray.
• When you specify the bypass tray as the input tray on the printer driver and perform printing, if you
set [Bypass Priority] to [Any Size/Type] under [Paper Input] on the control panel, the printer
ignores the paper type and size settings made on the control panel. Printing is performed with the
settings made on the printer driver.
ignores the paper type and size settings made on the control panel. Printing is performed with the
settings made on the printer driver.
• If you set [Bypass Priority] to [Machine Setting] under [Paper Input], paper size settings made on
the printer driver must match those made on the control panel. If they do not match, an error
message appears and printing stops if [Auto Continue] is not set to [On] under [System].
message appears and printing stops if [Auto Continue] is not set to [On] under [System].
Loading Paper
81