Ricoh CP6346 Benutzerhandbuch
Remarks
172
6
Maintaining Your Machine
To maintain high print quality, clean
the following parts and units regularly.
the following parts and units regularly.
❖ Cleaning the machine
Wipe the machine with a soft,
damp cloth. Then wipe it with a
dry cloth to remove the water.
damp cloth. Then wipe it with a
dry cloth to remove the water.
Important
❒ Do not use chemical cleaner or or-
ganic solvents, such as thinner or
benzene. If they get into the ma-
chine or melt plastic parts, a failure
might occur.
benzene. If they get into the ma-
chine or melt plastic parts, a failure
might occur.
❒ Do not clean parts other than those
specified in this manual. Such
parts should be cleaned by your
service representative.
parts should be cleaned by your
service representative.
Cleaning the Exposure Glass
A
Lift the exposure glass cover or
ADF.
ADF.
B
Clean
A and B.
Note
❒ When using the exposure glass,
clean
B only.
Cleaning the exposure glass
cover
cover
A
Lift the exposure glass cover.
B
Clean the exposure glass cover
with a damp cloth and wipe it
with a dry cloth.
with a damp cloth and wipe it
with a dry cloth.
Note
❒ If you do not clean the exposure
glass cover, marks on the cover
will be printed.
will be printed.
ZDCH130E
AM1P0100