Ricoh 220-240 V Benutzerhandbuch

Remote Maintenance by telnet

225

Use the “bonjour(rendezvous)” command to display bonjour(rendezvous)-related settings.

❖ View settings

Bonjour settings are displayed.
msh> bonjour

❖ Bonjour service name setting

You can specify the bonjour service name.
msh> bonjour cname “computer name”
• The computer name can be entered using up to 63 alphanumeric characters.

❖ Bonjour Installation location information setting

You can enter information about the location where the printer is installed.
msh> bonjour location “location”
• Information about location can be entered using up to 32 alphanumeric characters.

❖ Setting order of priority for each protocol

• diprint

• lpr

• ipp

You can specify the order of priority for “diprint”, “lpr”, and “ipp”. Smaller

numbers indicate higher priority.

❖ IP TTL setting

You can specify the IP TTL (the number of routers a packet can pass through). 

❒ The default is 255.

❖ Resetting the computer name and location information

You can reset the computer name and location information.
msh> bonjour clear {cname | location}
• cname

Reset the computer name. The default computer name will be displayed

when the computer is restarted.

• location

Reset the location information. The previous location information will be deleted.

❖ Interface configuration

msh> bonjour linklocal “interface_name”
• If many types of interface are installed, configure the interface that com-

municates with linklocal address.

• If you do not specify an interface, the Ethernet interface is automatically selected.
• wlan can be specified only when the IEEE 802.11b interface is installed.

ether

Ethernet interface

wlan

IEEE 802.11b interface