Philips 5900 Benutzerhandbuch

AXIS 5900 User’s Manual

33

This section describes how to set up a Windows 2000/XP/2003 server for 

LPR printing over the TCP/IP protocol, using the built-in Microsoft LPR 

Monitor i.e. Print Services for UNIX.

 

Basic Setup

If you have not already done so, you should perform the TCP/IP basic 

setup procedures prior to installing a printer for LPR printing.

Preparing for

LPR Printing

Follow the following steps to prepare for LPR printing:

1. Open the 

Control Panel.

2. Click 

Add/Remove Programs. 

3. Click 

4. Check 

Other Network File and Print Services and click Details.

5. Check 

Print Services for Unix and click OK.

6. Click 

Next and Finish. 

7. Close 

Add/Remove Programs and the Control Panel.

Installing an LPR

printer

Follow the instructions below to use the standard Windows method for 

installing an LPR printer in Windows 2000/XP/2003:

Windows XP/2003:

1. Go to 

Start | Printers and Faxes and click the Add a Printer icon to start 

the 

Add Printer Wizard. Click Next.

Windows 2000:

1. Go to 

Start | Settings | Printers and click the Add Printer icon to start 

the 

Add Printer Wizard. Click Next.

2. Select the appropriate radio button:

 Local Printer. Click Next. 

3. Click the 

Create a new port radio button and select LPR Port from the list. 

Click 

Next.

4. Enter IP address (or host name) of the print server in the field 

address of server providing lpr (Example: 192.168.3.191) and enter the port 
you want to use in the field 

Name of printer or print queue on that server, 

i.e. LPT1 or LPT2.

 Click 

OK.

5. End the Wizard in the usual manner: select Manufacturer and Printer, 

keep/replace driver, name the printer, make it default or not, share it or not 
and finally decide whether you want to print a test page.

how to set up printing over LPR without installing Print Services for Unix