Ricoh AP1400/AP2000 Benutzerhandbuch
Type 2 Printer: Loading Paper and Other Media
89
9
C
Insert the paper tray into the
printer until it stops.
printer until it stops.
Type 2 Printer: Loading Paper
in the Bypass Tray
in the Bypass Tray
Note
❒ Please refer to the inside of the
front cover of this manual to con-
firm which printer (Type 1 Printer
or Type 2 Printer) you have.
firm which printer (Type 1 Printer
or Type 2 Printer) you have.
❒ If you set the custom sized paper,
you should specify the paper size
using the printer driver. Also, use
the operation panel to set the cus-
tom size setting.
using the printer driver. Also, use
the operation panel to set the cus-
tom size setting.
A
Open the bypass tray.
Note
❒ If you load the paper of B5
K,
5
1
/
2
"
×
8
1
/
2
"
K or larger, pull
the bypass tray extender.
B
Slide the left side guide to the
left. Load paper until it stops with
the print side down. When load-
ing, the right side of paper stack
should be against the right side
guide.
left. Load paper until it stops with
the print side down. When load-
ing, the right side of paper stack
should be against the right side
guide.
Important
❒ If the paper stack is not against
the right side guide correctly,
the paper might not be fed cor-
rectly.
the paper might not be fed cor-
rectly.
Note
❒ It is recommended to load A5 or
5
1
/
2
"
×
8
1
/
2
" paper in the
K di-
rection.
TS4Y100E
TS4Y110E
TS4Y130E
TS4Y120E