Ricoh AP1400/AP2000 Benutzerhandbuch

Error & Status Messages on the Operation Panel

99

Load Bypass Tray

{paper size}

There is no paper on the by-
pass tray.

Load {paper size} paper in the 
specified feed direction onto the 
bypass tray. Printing will not au-
tomatically resume if the paper 
size and direction setting is incor-
rect. There are 2 methods to re-
sume printing.

A

Use the operation panel to set 
the correct size and direction 
of the paper in the bypass 
tray.  

B

Press 

{

} to have printing 

begin, regardless of the size 
and direction of the paper in 
the bypass tray.

❒ When “Auto Select” is speci-

fied for the paper source using 
the printer driver, this mes-
sage might appear when there 
is {paper size} paper in a dif-
ferent feed direction in any of 
the trays.

❒ The page is printed in the in-

correct format on the paper 
loaded on the bypass tray in 
the following cases.

• if you press 

{

} before 

loading the correct paper.

• if the specified period of 

time has passed with the 
Auto Continue feature on. 
In these cases, you can't 
continue printing due to 
the paper size error. You 
should take one of the fol-
lowing actions to clear this 
error:

• Press 

{

}. (Auto 

Continue feature 
doesn't work with this 
error.)

• Open and close any of 

the trays.

The actual size of paper 
loaded on the bypass tray 
does not match the size for 
which the page was built.