Ricoh AP1400/AP2000 Benutzerhandbuch

Troubleshooting

102

Memory Overflow

There is not enough memory 
to print the data.

If the “Auto Continue” feature is 
set to on, press 

{

} to print 

out the data. To clear this mes-
sage, change the print resolution 
from 1200dpi to 600dpi or 600dpi 
to 300dpi, and try printing again. 
If the print result is not enhanced, 
you should increase the memory 
capacity.

Print Overrun

The data sent to the printer 
was too complex.

Press 

{

} to print out the data 

sent to the printer. If you don't 
want to lose any of the trans-
ferred data, set the “Page Pro-
tect” feature to “On”, before 
printing the job. If you can't clear 
this message, simplify the print 
job.

❒ Make sure to return the “Page 

Protect” feature to “Off” after 
the print job. With the “Page 
Protect” feature “On”, the 
printer performance might be 
decreased.

Remove Misfeed

Front Cover&Tray

There is a misfeed in the 
printer.

Remove the misfed paper.

Remove Misfeed

Open Front Cover

There is a misfeed in the 
printer.

Remove the misfed paper.

Replace

Fusing unit

The fusing unit is not set cor-
rectly.

Set the fusing unit correctly.

Replace

Maintenance Kit

It is time to replace parts in-
cluded in the Maintenance 
Kit.

Replace parts. For more informa-
tion on the Maintenance Kit, see 
“Operating Instructions” that 
comes with the Kit.

Replace

Toner Cartridge

The toner cartridge is not set 
correctly or toner is almost 
running out.

Set the toner cartridge correctly.

Prepare a new toner cartridge. If 
the image density gets too light, 
replace the toner cartridge with a 
new one.